SciCan STATCARE Multi Spray Nozzle

$20.98

Only 1 left in stock (can be backordered)

SKU: SCI-S500M Categories: , ,

High speed handpieces

Preparation
After use of the high speed handpiece, remove the bur or diamond and clean the handpiece
externally, using a soft bristle brush under cold tap water. Dry handpiece with gauze or
paper towel.

Lubricate and operate
To lubricate and clean turbines use Multi spray nozzle #S500M as illustrated.
Hold a tissue, paper towel or an absorbent pad over the head of the instrument to catch
dispelled debris. Then inspect the pad, if it is soiled, lubricate again until only clean oil is emitted.
Place handpiece back onto the handpiece tubing and operate for 20-30 seconds to expel
excess lubricant.
The handpiece is now ready for sterilization.

Multi Spray Nozzle

#SCI-S500M

Promotion Redemption

Reviews

There are no reviews yet.

Be the first to review “SciCan STATCARE Multi Spray Nozzle”

Shop Category

[]